Ventilkåpa och tillbehör

Kromat push-in oljelock/ventilator. 1" (25 mm) för 31 mm dia. hål i ventilkåpan. 5/8" slanganslutning. Med logo.

Rostfritt kit för Aluminiumkåpor.

1/4"-20 x 0,812" (20,6mm), 5/16" skalle 12-kant

Chevy SB 283-400ci 1958-1986. Billet aluminium. Svarta, TIG svetsade med -12 ORB anslutning
Aeroflows TIG svetsade kåpor är gjorda helt i aluminium av hög kvalitet och är lätta. De har en  CNC fräst fläns i 6061-T6 aluminium för att garantera en plan yta för tätning. De finns i antingen polerad eller svart anodiserad finish. Kåporna levereras som standard med en -8 ORB eller -12 ORB hon anslutning och ett o-rings tätat gängat Billet oljepåfyllnings lock. Alla kåpor är tillräckligt höga för att klara 99% av alla vipparms kombinationer.

Mopar SB 273-318-340-360ci 1964-1991. Kromade utan logo.

Ventilkåpsbultsats

-Svart oxiderade

-Chromoly

-6-Kants Skalle

-1/4-20" Gänga

-0,812" Gänglängd

-Brickor Medföljer

-Säljes i kit om 14st

Stamped steel hex valve cover bolt kit

1/4"-20 x 0,515" (13,0mm), 5/16" skalle

LS1 LS2 12pt valve cover bolt kit

M6 x 70mm, 8mm skalle 12-kant. Bricka tjocklek 4,2mm

Merlin block, Brodix head BB 12pt valve cover bolt kit

1/4"-20 x 4,000" (102mm) 5/16" skalle 12-kant

Svart aluminium lock till Aeroflows svetsade ventilkåpor.

Ford 302 Boss/351C/351M/400. Billet aluminium. Svarta, TIG svetsade med -12 ORB anslutning
Aeroflows TIG svetsade kåpor är gjorda helt i aluminium av hög kvalitet och är lätta. De har en  CNC fräst fläns i 6061-T6 aluminium för att garantera en plan yta för tätning. De finns i antingen polerad eller svart anodiserad finish. Kåporna levereras som standard med en -8 ORB eller -12 ORB hon anslutning och ett o-rings tätat gängat Billet oljepåfyllnings lock. Alla kåpor är tillräckligt höga för att klara 99% av alla vipparms kombinationer.

Aluminium Ventilkåpor till LS, AN8 ORB Lock - Svart
Aeroflows TIG svetsade kåpor är gjorda helt i aluminium av hög kvalitet och är lätta. De har en  CNC fräst fläns i 6061-T6 aluminium för att garantera en plan yta för tätning. De finns i antingen polerad eller svart anodiserad finish. Kåporna levereras som standard med en -8 ORB eller -12 ORB hon anslutning och ett o-rings tätat gängat Billet oljepåfyllnings lock. Alla kåpor är tillräckligt höga för att klara 99% av alla vipparms kombinationer.

Chevrolet 283-400ci 1958-1986 SBC. Höga svarta med Aeroflow logo. Ingår en 19,05mm (3/4") ID och en 25,4mm (1") ID gummibussning som passar 31,5mm (1-1/4") hål.

Svart push-in oljelock/ventilator. 1" (25 mm) för 31 mm dia. hål i ventilkåpan. 5/8" slanganslutning. Utan logo.

Svart push-in oljelock/ventilator. 1" (25 mm) för 31 mm dia. hål i ventilkåpan. 5/8" slanganslutning. Med logo.

Chevrolet 283-400ci 1958-1986 SBC. Höga kromade Utan logo. Ingår en 19,05mm (3/4") ID och en 25,4mm (1") ID gummibussning som passar 31,5mm (1-1/4") hål.

Kromat push-in oljelock/ventilator. 1" (25 mm) för 31 mm dia. hål i ventilkåpan. 5/8" slanganslutning. Utan logo.

Ford SB 260-351W 1962-85. Kromade.

GM LS Billet Valve Cover Set, Raw Finish with Aeroflow Logo Suit GM LS Series Engines. No Coil Mounts
The Aeroflow Performance billet aluminium GM LS valve cover will give your Chevrolet LS series engine a performance upgrade over stock and a totally new look. The LS valve covers are CNC machined from billet 6061- T6 aircraft grade aluminium for the most discerning performance engine user. This ensures a superior fit and seal opposed to the cast covers that are plagued with fitment and leak issues with the factory gaskets. These valve covers are designed for use in an application where the ignition coils are mounted in a remote location and the taller design will fit over most aftermarket rocker assemblies without requiring a spacer.Each rocker cover features two female -10 ORB ports on either end of the valve covers for aftermarket breather/catch can setups. The drivers side valve cover features a low-profile oil fill cap. They are available with or without Aeroflow Logo and available in Raw finish or Black anodized finish.

GM LS Billet Valve Cover Set, Raw Finish with No Logo Suit GM LS Series Engines. No Coil Mounts
The Aeroflow Performance billet aluminium GM LS valve cover will give your Chevrolet LS series engine a performance upgrade over stock and a totally new look. The LS valve covers are CNC machined from billet 6061- T6 aircraft grade aluminium for the most discerning performance engine user. This ensures a superior fit and seal opposed to the cast covers that are plagued with fitment and leak issues with the factory gaskets. These valve covers are designed for use in an application where the ignition coils are mounted in a remote location and the taller design will fit over most aftermarket rocker assemblies without requiring a spacer.Each rocker cover features two female -10 ORB ports on either end of the valve covers for aftermarket breather/catch can setups. The drivers side valve cover features a low-profile oil fill cap. They are available with or without Aeroflow Logo and available in Raw finish or Black anodized finish.

GM LS Billet Valve Cover Set, Black Finish with No Logo Suit GM LS Series Engines. No Coil Mounts
The Aeroflow Performance billet aluminium GM LS valve cover will give your Chevrolet LS series engine a performance upgrade over stock and a totally new look. The LS valve covers are CNC machined from billet 6061- T6 aircraft grade aluminium for the most discerning performance engine user. This ensures a superior fit and seal opposed to the cast covers that are plagued with fitment and leak issues with the factory gaskets. These valve covers are designed for use in an application where the ignition coils are mounted in a remote location and the taller design will fit over most aftermarket rocker assemblies without requiring a spacer.Each rocker cover features two female -10 ORB ports on either end of the valve covers for aftermarket breather/catch can setups. The drivers side valve cover features a low-profile oil fill cap. They are available with or without Aeroflow Logo and available in Raw finish or Black anodized finish.

GM LS1 Billet Valley Plate, Raw Finish Suit GM LS1 Series
Aeroflow Performance billet LS1 valley plate is perfect for those who want to clean up the look of their modern LS engine or create a custom touch. Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes and still take the factory gasket. Precision manufactured from billet aluminium with a modern, race inspired design and a cost -effective alternative to the factory GM pieces. This valley plate does not have the two provisions for knock sensors, which are usually not used in racing applications, as open headers, solid lifter cams and stiff suspensions can false trigger them. They can be used on factory and aftermarket GM LS1 style engine blocks. Will not fit Gen 4 Engine Blocks (LS3, LS7, or blocks with Active Fuel Management (AFM), DOD) use part number AF77-5016 .

GM LS1 Billet Valley Plate, Black Finish Suit GM LS1 Series
Aeroflow Performance billet LS1 valley plate is perfect for those who want to clean up the look of their modern LS engine or create a custom touch. Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes ad still take the factory gasket. Precision manufactured from billet aluminium with a modern, race inspired design and a cost -effective alternative to the factory GM pieces. This valley plate does not have the two provisions for knock sensors, which are usually not used in racing applications, as open headers, solid lifter cams and stiff suspensions can false trigger them. They can be used on factory and aftermarket GM LS1 style engine blocks. Will not fit Gen 4 Engine Blocks (LS3, LS7, or blocks with Active Fuel Management (AFM), DOD) use part number AF77-5016 .

GM LS3 Billet Valley Plate, Raw Finish Suit GM LS3 Series Engines with DOD delete
Aeroflow Performance billet LS3 valley plate is perfect for those who want to clean up the look of their modern LS engine or create a custom touch. Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes ad still take the factory gasket. Precision manufactured from billet aluminium with a modern, race inspired design and a cost -effective alternative to the factory GM pieces. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On-Demand (DOD) or Active Fuel Management (AFM), and instead feature O-Ring gaskets to seal them off. An extra 90-degree provision is bolted to the top of the valley plate for re-installing the oil pressure sensor if necessary.

GM LS3 Billet Valley Plate, Black Finish Suit GM LS3 Series Engines with DOD delete
Aeroflow Performance billet LS3 valley plate is perfect for those who want to clean up the look of their modern LS engine or create a custom touch. Designed to be low profile that will eliminate any fitment issues with factory and aftermarket intakes ad still take the factory gasket. Precision manufactured from billet aluminium with a modern, race inspired design and a cost -effective alternative to the factory GM pieces. These valley plates are machined smooth on the underside, allowing for the elimination of Displacement-On-Demand (DOD) or Active Fuel Management (AFM), and instead feature O-Ring gaskets to seal them off. An extra 90-degree provision is bolted to the top of the valley plate for re-installing the oil pressure sensor if necessary.

GM LS Factory Valve Cover Set, Tall Height, Natural Cast Finish - Suit GM LS Series Engines. Factory Position Coil Mounts
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers allow you to bolt the factory coils back into the factory position but without the brackets required on the OE covers. These valve covers were designed to add an additional 13mm of internal clearance over the factory height valve covers. It also features a baffled stock-style ventilation set-up and oil fill cap while also retaining the factory gaskets and bolts. Fits all LS engines using LS2, LS3, LS7 or similar coils with 72mm bolt spacing. Tall factory style LS valve covers suits GM LS2 style coil packs with 72mm bolt spacing (sold separatley AF4020-8262). Total Height is 76mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x GM LS valve cover (one with oil fill cap and both have 3/8" breather hose barb) 8 x Valve cover mounting socket cap screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)

GM LS Factory Valve Cover Set, Tall Height, Black Finish - Suit GM LS Series Engines. Factory Position Coil Mounts
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers allow you to bolt the factory coils back into the factory position but without the brackets required on the OE covers. These valve covers were designed to add an additional 13mm of internal clearance over the factory height valve covers. It also features a baffled stock-style ventilation set-up and oil fill cap while also retaining the factory gaskets and bolts. Fits all LS engines using LS2, LS3, LS7 or similar coils with 72mm bolt spacing. Tall factory style LS valve covers suits GM LS2 style coil packs with 72mm bolt spacing (sold separatley AF4020-8262). Total Height is 76mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x GM LS valve cover (one with oil fill cap and both have 3/8" breather hose barb) 8 x Valve cover mounting socket cap screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)

GM LS Factory Valve Cover Set, Tall Height, Polished Finish - Suit GM LS Series Engines. Factory Position Coil Mounts
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers allow you to bolt the factory coils back into the factory position but without the brackets required on the OE covers. These valve covers were designed to add an additional 13mm of internal clearance over the factory height valve covers. It also features a baffled stock-style ventilation set-up and oil fill cap while also retaining the factory gaskets and bolts. Fits all LS engines using LS2, LS3, LS7 or similar coils with 72mm bolt spacing. Tall factory style LS valve covers suits GM LS2 style coil packs with 72mm bolt spacing (sold separatley AF4020-8262). Total Height is 76mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x GM LS valve cover (one with oil fill cap and both have 3/8" breather hose barb) 8 x Valve cover mounting socket cap screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)

GM LS 2 Piece Retro Finned Valve Cover Set, Black Finish - Suit GM LS Series Engines. Factory Position Coil Mounts with Tall Cover
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers are a 2-piece retro finned design. These feature a low, internally baffled LS valve cover base with integrated coil mounts and a retro style finned overcover that hides the ignition coils and wiring harness. It also features a baffled stock-style ventilation set-up with an oil fill cap while also retaining the factory gaskets and bolts. All hardware and spacers for mounting ignition coils and 12-point dress up hardware and rubber grommets for the coil covers are included. Fits all LS engines using both LS1 and LS2 or similar coils. Coil mounts on base plate suits both LS1 style coil packs sold separatley (AF4020-8262) and LS2 style coil packs sold separatley (AF4020-8265). Total Height is 96mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x Gm LS valve cover base with oil fill oil and 3/8" Barb 2 x GM LS valve cover over cover 2 x Cast oil fill cap with o-ring 8 x 12 point over cover dress up bolts (1/4-20" thread 55mm UHL) 8 x rubber grommets for over cover dress up bolts 16 x coil mounting socket cap screws M6 x 1.00 thread (1-35mm UHL) 16 x plastic coil spacers (12.4mm O.D, 6.5mm I.D, 14.7mm Height) 8 x Valve cover base mounting hex head screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)

GM LS 2 Piece Retro Finned Valve Cover Set, Polished Finish - Suit GM LS Series Engines. Factory Position Coil Mounts with Tall Cover
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers are a 2-piece retro finned design. These feature a low, internally baffled LS valve cover base with integrated coil mounts and a retro style finned overcover that hides the ignition coils and wiring harness. It also features a baffled stock-style ventilation set-up with an oil fill cap while also retaining the factory gaskets and bolts. All hardware and spacers for mounting ignition coils and 12-point dress up hardware and rubber grommets for the coil covers are included. Fits all LS engines using both LS1 and LS2 or similar coils. Coil mounts on base plate suits both LS1 style coil packs sold separatley (AF4020-8262) and LS2 style coil packs sold separatley (AF4020-8265). Total Height is 96mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x Gm LS valve cover base with oil fill oil and 3/8" Barb 2 x GM LS valve cover over cover 2 x Cast oil fill cap with o-ring 8 x 12 point over cover dress up bolts (1/4-20" thread 55mm UHL) 8 x rubber grommets for over cover dress up bolts 16 x coil mounting socket cap screws M6 x 1.00 thread (1-35mm UHL) 16 x plastic coil spacers (12.4mm O.D, 6.5mm I.D, 14.7mm Height) 8 x Valve cover base mounting hex head screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)

GM LS 2 Piece Retro Smooth Valve Cover Set, Black Finish - Suit GM LS Series Engines. Factory Position Coil Mounts with Tall Cover
Cast aluminium valve covers are a great way to improve and refine the look of your LS engine, without any radical changes to its configuration. These Aeroflow Performance valve covers are a 2-piece smooth design. These feature a low, internally baffled LS valve cover base with integrated coil mounts and a smooth finish overcover that hides the ignition coils and wiring harness. It also features a baffled stock-style ventilation set-up with an oil fill cap while also retaining the factory gaskets and bolts. All hardware and spacers for mounting ignition coils and 12-point dress up hardware and rubber grommets for the coil covers are included. Fits all LS engines using both LS1 and LS2 or similar coils. Coil mounts on base plate suits both LS1 style coil packs sold separatley (AF4020-8262) and LS2 style coil packs sold separatley (AF4020-8265). Total Height is 96mm. Valvetrain Clearance is .750" lift cam with stock style rocker arms. Valve Cover includes: 2 x Gm LS valve cover base with oil fill oil and 3/8" Barb 2 x GM LS valve cover over cover 2 x Cast oil fill cap with o-ring 8 x 12 point over cover dress up bolts (1/4-20" thread 55mm UHL) 8 x rubber grommets for over cover dress up bolts 16 x coil mounting socket cap screws M6 x 1.00 thread (1-35mm UHL) 16 x plastic coil spacers (12.4mm O.D, 6.5mm I.D, 14.7mm Height) 8 x Valve cover base mounting hex head screws (M6 x 1.00mm, 85mm UHL) 8 x Valve cover base stands and grommets 8 x Flat Washers 2 x rubber valve cover gaskets (AF1850-1013)